This video shows you how to convert a design built with TPH PCB technology to one using SMT. The design will be dramatically reduced in size and manufacturing costs will also be greatly reduced.

This is a quick video to show you some modeling in Active3D. Active3D is part of AutoTRAX DEX.

This video show you how to reduce the width of a track segment to avoid design rule errors when routing between pads.

This video show you how to do real time design rule checking when manually routing your PCB.

STL 3D file exported from AutoTRAX DEX viewed on the web

This video show you how to change track widths during manual routing with AutoTRAX DEX.

This short video will give you an insight into PCB Auto-layout with AutoTRAX DEX

This video shows you how to add holes and cutouts to your PCB and how to edit them.

Importing a PCB from AutoCAD into AutoTRAX DEX

Combing Shapes into a PCB

This show you how to create a PCB board from a schematic, layout the parts on the PCB, minimize the size of the PCB and auto-route the PCB with a single click This process takes only a few seconds and you can easily do this yourself with AutoTRAX DEX.

This video show you the 4 different ways to rotate parts on your PCB in AutoTRAX DEX.

Swapping connections for a part

This short demo shows you how to auto-route a PCB in seconds saving you time and money. This leaves you with loads of time to do something more interesting than manual routing.

PCB Manual Routing is initially demonstrated in this video.

3 different routing techniques for PCB design

This video shows you how to connect a SMT pad on the top side of a PCB to a copper pour area on a different layer in AutoTRAX DEX.

The video show you how to quickly manually route a PCB in AutoTRAX DEX.

Interactive PCB routing with AutoTRAX DEX is demonstrated in this video.

This video show you more tips on manually routing your PCB.

This video show you how to manually route between TPH pads and SMT pads on different PCB layers in AutoTRAX DEX. It also show you how to add redundant tracks and delete them.

This video show you how to easily route a track/net on a PCB with automatic target suggestions.

This quick demo shows you how to add a jumper to a track to get past an obstacle that you cannot route around using the current layers on the PCB.

Swapping Layers with AutoTRAX DEX

This video show you how to set the width of all the tracks in a PCB net from the schematic. It also demonstrates AutoTRAX DEX's PCB Builder and how it takes into account track widths.

Teardrops on pads/via with AutoTRAX DEX

With AutoTRAX DEX you can have a simple cursor or an optional full screen width/height line cursor that many of you like. This choice is your. This video show you how to switch between the two.

This video show you solder mask differences in PCBs

With AutoTRAX DEX you can choose between classic simple 'stick' text or professional looking True-type fonts for your PCB silkscreens. This video show you the difference and how to make your choice.

This video show you how to automatically connect SMT pads to power planes

This video show you how to partially route a PCB track and them come back to it later and finish it off.

This video demonstrates how to create a Rigid-Flex PCB using AutoTRAX DEX.

The video show you how to manual route a PCB track and ensure the final segment is horizontal/Vertical or at a 45° angle to the target Pad.

This video shows you how the new routing using copper pour areas will work in AutoTRAX DEX. It demonstrates manually routing a VCC net that connects three pads in the copper pour region. You will see that the integrity is maintained and you are guided to valid targets during manual routing. The end result is that a net has been correctly routed and maintains the electrical connectivity are defined by the schematics for the PCB project.