<< Click to Display Table of Contents >>
Navigation: AutoTRAX PCB Design Express (DEX) > Designs > Printing and Plotting >
To plot your PCB click the Tools→CAM→ button.
The ploy preview shown above consists of a ribbon menu, a options panel on the left and a preview window to the right of the options panel and below the ribbon menu.
click to print the selected pages.
The ribbon menu can be split into 2 parts, the View button group on the left and the common ribbon button groups on the right.
The button shows/hides the option panel shown below.
Click to read about the Common Print Menu
The Option Panel
The options panel lets you scale the printing or have the sheets automatically fill the printed page.
Check to have the sheets automatically fill the printed page, If you uncheck it, you can set the print scale. Note, it is possible to set the scale such that the sheet will not all fit on the printed page.
Layers to Plot
Check/uncheck the check boxes in the Plot column to include/exclude the layer in the print run.
Check/uncheck the check boxes in the Negative column to print that sheet in negative.
Check/uncheck the check boxes in the Reverse column to print that sheet reversed in the horizontal direction.
Clicking displays this help topic.