Style Guide

<< Click to Display Table of Contents >>

Navigation:  AutoTRAX PCB Design Express (DEX) > Designs > Projects > Schematics > Wiring Parts Together >

Style Guide

Use Jumpers for wire crossings.

Avoid wire crossings. You often can do this by moving and/or rotating parts. (TP1 can be moved)

Align parts. e.g. V1, R1,R2 and C1, horizontally, R1 and R2 vertically.

Use common point to make circuit function obvious and also pleasing to the eye.

Center the schematic on the page.

Show signal flow from left to right. Inputs on the left, outputs on the right.

However, as always with DEX, the choice is yours.




Ugly and ambiguous (jumper)